********************
4. Installation process
********************

.. _Installation process:

After you get all the necessary software, you can install the IoT Light Control.

From sources
============


    The sources for IoT Light Control can be downloaded from the `Gitlab repo`_.

1 You can either clone the public repository:

.. code-block:: console

    $ git clone git@gitlab.com:zapis-dublya/iot-traffic-light-control.git

Or download the `tarball`_:

.. code-block:: console

    $ curl  -L 'https://gitlab.com/zapis-dublya/iot-traffic-light-control/repository/archive.tar?ref=master' -o iot_light_control.tar

And extract it with:

.. code-block:: console

    $ tar xvf archive.tar

2 Once you have a copy of the source, you can install it with:

.. code-block:: console

    $ python setup.py install

.. _Gitlab repo: https://gitlab.com/zapis-dublya/iot-traffic-light-control
.. _tarball: https://gitlab.com/zapis-dublya/iot-traffic-light-control/repository/archive.tar


As for hardware, find the necessary information below.
Grove Base Shield Interfaces:


Connect the following devices:

.. image:: pics/image02.png

Also, the table contains the information about the documented API of components.

Connect the buzzer using the following scheme or the live photo as an example.

.. image:: pics/image11.png

.. image:: pics/image17.jpg

Connect the USB WebCamera and set it above the road.

Aslo, you will need the `Mobile Application <mobile.html>`__ to control the system.
Download it and install on your Android device,

Congratulations! IoT Light Control is ready to use.